The new Altendorf F 5 ELMO has been fundamentally redesigned. The result is a high-tech
modular system, which handles even the most challenging technical requirements of
the saw user. The low-reflection 12” colour LCD display with touch screen
functionality is new. This display method makes for straightforward operation through
a self-explanatory, graphics-oriented approach to control. The display shows 90% of
the applications, thus cutting down on time spent navigating. The USB port for data
exchange and backup is also new. A further innovation is the crosscut-mitre fence on
the F 45 ELMO IV, which can be adjusted to any angle between 0 and 47° and has
integral length compensation.
There are two versions of the F 45 ELMO with either three or four motorised
axes (F 45 ELMO III and F 45 ELMO IV respectively). Each of these machines can be
equipped with optional extras to meet your own individual requirements.
In 2007 the jury of the International Forum Design presented its iF gold award
for outstanding product design to the F 45 ELMO. |
| Sliding Table Cutting Lengths: |
Maximum cutting lengths when using clamping shoe or crosscut-mitre fence. Not in conjunction with crosscut fence, stops to 2 500 mm. |
Table length (mm) |
2250 |
3000 |
3200 |
3400 |
3800 |
4300 |
5000 |
Cutting length (mm)
with or without scoring saw blade |
2155 |
2905 |
3105 |
3305 |
3705 |
3870
(4205*) |
3870
(4905*) |
Cutting length (mm) for F 45 ELMO IV
with or without scoring saw blade |
2100 |
2850 |
3050 |
3250 |
3650 |
- |
- |
TIP-SERVO-DRIVE |
Cutting length (mm)
without scoring saw blade |
1840 |
2590 |
2790 |
2990 |
3390 |
3870 |
3870
(4570*) |
Cutting length (mm)
with scoring saw blade |
1725 |
2475 |
2675 |
2875 |
3275 |
3775 |
3775
(4475*) |
* Possible cutting lengths without use of the crosscut fence and cross slide.
Cutting lengths refer to mechanical travel, i. e. from end stop to end stop on the sliding table. |
| Depth Of Cut: |
without scoring saw blade |
Saw Blade Diameter (mm) |
250 |
300 |
315 |
350 |
400 |
450 |
500 |
550 |
Depth of cut vertical (mm) |
0-50 |
0-75 |
0-82 |
0-100 |
25-125 |
50-150 |
75-175 |
100-200 |
Depth of cut at 45° (mm) |
0-33 |
0-50 |
0-56 |
0-70 |
17-87 |
34-105 |
52-123 |
70-141 |
|
|
|
|
|
|
|
|
|
with scoring saw blade |
Saw Blade Diameter (mm) |
250 |
300 |
315 |
350 |
400 |
4501) |
5001) |
- |
Depth of cut vertical (mm) |
0-50 |
0-75 |
0-82 |
0-100 |
0-125 |
25-150 |
50-175 |
- |
Depth of cut at 45° (mm) |
0-33 |
0-50 |
0-56 |
0-70 |
0-87 |
16-105 |
34-123 |
- |
1) If a scoring unit is fitted, the scoring saw blade, incl. front and back flanges, or RAPIDO must be removed. |
|
