Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high praticalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders.

Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is therefore possible to carry out 6-7 grindings.
It is easy and quick to disassemble.

Spreading, precise and uniform on one or both sides of the panels.

Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventualparallelism differences of the panel.

Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning.

Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning.

Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than5 mm. thick over the transit established, ensuring the maximum safety for the operator.

Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection.

Control panel, with starting button, stopping button and warning light (24 V).

Rollers rotation chain with self-registrable turnbuckle pinion.

Roller washing with a bored washing tube, for the water intake during this operation.

Optionals on request:
- manual washer with brushes;
- n. 4 poliurethane wheels (2 with brakes);
- Motovariator HP 0,5 from 5 to 26 mt/min.;
- Roller cooling system.