Registerd Office
Gorton Crescent Windmill Industrial Estate
Oldham Street
Denton
Manchester
M34 3RB
Telephone:
0161-320-3216
Fax:
0161-337-8162
|
|
| . |
Mpower RS-420 Radial Arm Saw
-
Rail surface is nitriding hardened, friction and wear is reduced to the minimum. Precision ground for smooth and accurate slide of sawhead.
-
Replaceable rail allows ease of maintenance.
-
Sawhead runs on 8 ball bearings, providing effortless moving and comfortable operation.
-
Rigidly constructed arm is one-piece casted, assuring deformation free after years of operation.
-
Sawblade is driven with a high performance 4hp motor, compact and very light in weight.
-
Arm swivells 45 degrees right and left.
-
Sawblade may be set at any angle, and locked securely at the desired setting.
-
Fully guarded sawblade gives maximum safety for the operator.
-
Anti-Kickback pawls provides positive work holding and added safety.
|
|
|
|
|
- Heavy duty body.
- Pneumatic stroke.
- Operator panel with key pad.
- Two hand safety operation.
- Heavy duty length stop NC controlled.
- Vertical clamping.
- 500mm saw blade.
- Available with mechanical or pneumatic stops.
|
| |
| Motor |
4hp |
| Motor speed |
2875rpm(50Hz)
3450rpm(60Hz) |
| Bearings for rails |
8pcs |
| Spindle diameter |
1"(25.4mm) |
| Blade diameter |
14"(355mm) or
12"(305mm) |
| Head swiveling |
0 - 180 degrees |
| Head tilting |
0 - 90 degrees |
| Max. trimming width |
W=860mm |
| Max. cross cutting length |
L=680mm |
| 90 degree Cross cut capacity |
| at H = 20mm |
L=640mm |
| at H = 110mm |
L=550mm |
| 45 degree Cross cut capacity |
| at H = 20mm |
L=453mm |
| at H = 110mm |
L=389mm |
| Table area L x W |
1120mmx860mm |
| Packing/Weight table |
| Overall Measurment (cm) |
116 x 112 x 142 |
| Packing dimension (cm) |
117 x 91 x 43 |
| Net weight |
197kg |
| Gross weight |
247kg |
|
|
|
|
