Registerd Office
Gorton Crescent Windmill Industrial Estate
Oldham Street
Denton
Manchester
M34 3RB
Telephone:
0161-320-3216
Fax:
0161-337-8162
|
|
| . |
 |
OMEC
F11CN
The two-axis automatic mill
cutter with numerical control, OMEC F11CN, is designed
to indent dovetails, French and parallel indents
for drawers and several furniture elements. The
machine is extremely flexible and enables to perform
ten different types of indents. Model F11 CN is
equipped with a spindle and a mill cutter that allow
the production of indents of different heights.
The machine is designed to cut single male or female
workpieces, or both simultaneously. Pieces can be
clamped and released in manual mode by means of
pneumatic valves. Controls are issued from a numerically
controlled push button panel. Model F11 is controlled
by a numerical control system that is programmed
to guarantee the utmost machining flexibility and
to change the machining limits within the following
variables:
|
| - type of indents |
- dimensions of the pieces |
| - pitch of indents |
- cutting speed and tool feeding |
| - number of indents |
- compensation of the tool radius variation |
| - depth of indents |
- variation |
| TECHNICAL CHARACTERISTICS
|
| Power installed
on the machine board |
Kw
4,2 |
| Working pressure |
Mpascal
0,7 |
| Spindles |
n°
1 |
| Spindle revolutions |
rpm
18.000 |
| Centre to centre
of indents |
mm
variable |
| Drawers production |
n/h
60 |
| Machine weight |
kg
400 |
| Packaging dimensions |
cm
100x185x145 |
| MINIMUM AND MAXIMUM DIMENSIONS OF
THE PIECES |
| Dimension |
Length |
Width |
Height of indent |
Thickness of front
|
Thickness of sides
|
| minimum |
170mm |
60mm |
6mm |
8mm |
8mm
|
| maximum |
1500mm |
770mm |
18mm |
55mm |
30mm |
| STANDARD CONFIGURATION |
| standard Ø 14 mill cutters in integral HM assembled
on the machine |
| tool kit for adjustment and maintenance operations |
| operation and instruction manual |
| OPTIONAL FEATURES (supplied
on specific request of the Customer) |
| A05 |
Equipment for the machining
of small pieces |
| A06 |
Chip suction unit |
| A24 |
Ø 14 standard spare
mill cutters in integral HM |
| A25 |
Ø 14 mill cutters with
deburring tool in integral HM to machine soft woods |
| A26 |
Ø 6÷13 dovetail mill
cutters for the production of indents with small
pitches |
| A27 |
Ø 6÷14 cylindrical mill
cutters for the production of parallel indents |
| A28 |
Spindle clamp for Ø
6÷13 mill cutters |
|
|
