Registerd Office
Gorton Crescent Windmill Industrial Estate
Oldham Street
Denton
Manchester
M34 3RB
Telephone:
0161-320-3216
Fax:
0161-337-8162
|
|
| . |
 |
OMEC
F9
The multiple milling machine
OMEC F9 is used to make parallel indents for door
frames and other furniture pieces. The machine is
equipped with a cutter unit and two saw units to
allow the machining of 45° cut. The F9 model machine
automatically single both cases and single crosspieces.
The locking of the pieces takes place automatically
at the beginning of each cycle. The same takes place
for the release of the pieces at the end of each
cycle. Controls are located on a built-in control
panel. The F9 model is controlled by a numerical
control system which is entrusted with the working
cycle control. |
| TECHNICAL CHARACTERISTICS
|
| On board machine
installed power |
Kw
10,5 |
| Working pressure |
Mpascal
0,7 |
| Cutter |
n°
1 |
| Cutter revolutions |
rpm'
5.600 |
| Blades |
n°
2 |
| Blade revolutions |
rpm
2.800 |
| Average production
of full door frames |
nph
30 |
| Machine weight |
kg
850 |
| Dimensions of
the package |
cm
140x180x180 |
| DIMENSIONAL LIMITS OF WORKPIECES |
| Dimensions |
Length |
Width |
Indent Height |
Case Thickness |
Crosspiece Thickness |
| Minimum |
500mm |
60mm |
50mm |
15mm |
15mm |
| Maximum |
2500mm |
300mm |
50mm |
50mm |
50mm |
| STANDARD COMPOSITION |
| n.1Ø200x30 mill cutters with HM knives |
| Series of n°2 Ø250x3,2 blades with HM knives |
| Tool kit for adjustment and maintenance |
| Instruction and operator's manual |
| OPTIONAL (supplied
on specific request of Customer |
| A20 |
Ø250x3,2 blades with
HM knives |
| A30/01 |
Ø200x10 mill cutters
with HM knives |
| A30/02 |
Ø200x20 mill cutters
with HM knives |
| A30/03 |
Ø200x30 mill cutters
with HM knives |
| A32/02 |
HM knife for mill cutters
mm.10 |
| A32/03 |
HM knife for mill cutters
mm.20 |
| A32/04 |
HM knife for mill cutters
mm.30 |
| A33 |
Scribing knife for mill
cutters |
|
|
